Safety
Workplace Safety

8 Safety Equipment You Must Have

Accidents in a factory can happen for a number of reasons, ranging from a poor physical condition, carelessness, lack of experience. Not good at tools damaged equipment/tools/machinery. The safety system within the factory is not up to standard. And most importantly working without personal protective equipment.

In fact, the factory has a Safety First principle that must comply with the Occupational Safety, Health, and Environment Act, B.E. ‘The factory owner or employer is responsible for operational safety. All types of protective equipment must be complete and sufficient. ‘If neglected, there will be civil and criminal penalties.

Therefore, as the owner of the factory or anyone doing business related to machinery. Let’s go see the safety equipment that is required.

Personal protective equipment (PPE)

Safety equipment officially named Personal Protective Equipment ( PPE ) or PPE is a device for wearing to prevent unexpected accidents from work.

#1 Face protection safety device

Equipment face protection, or safety mask. It is a device for the protection of the respiratory system. It can be used to filter suspended particles mixed in the air such as dust, smoke, metal fumes (metal particles dispersed in the air), gas vapors or chemicals, etc. for factories with less dust. 

It may be used as a respirator or N95 mask, but for factories dealing with chemicals, volatile chemicals, or factories where workers are exposed to dust all the time on duty. It is necessary to use a dust mask with a filtered air filter. It will be effective in filtering various suspended solids more than sure enough.

#2 Eye protection equipment

Equipment for eye protection It will keep your eyes safe from chemicals, metal chips, wood chips, and more. Typically, the basic eye protection that every factory has to have is safety goggles, which come in different types depending on the nature of the job. Most glasses are glasses that cover the eyes. 

There are both made of plastic. For protection against bumps or pieces of material Suitable for grinding, woodworking, chemical-related work, etc., but if it is a factory that cuts or welding metal Should be used exclusively as a welding mask. It will be able to prevent dust, light, radiation, and heat better.

#3 Hand protection devices

Working in factories where equipment must be handled all the time, gloves are one of the most essential devices and it is important to choose the right gloves according to the nature of the job. Otherwise, it may make it difficult to handle anything, or that protection is not good enough. Types of gloves can be categorized according to the nature of their work as follows.

  • Asbestos gloves for protection against heat or fire.
  • Metal-fiber gloves for work that requires cutting, cutting, or handling sharp objects.
  • Electrical work gloves But if it is a work involving high voltage Must wear 1 more layer of leather gloves
  • Vinyl gloves/neoprene gloves For work involving chemicals
  • Leather gloves for wood, metalwork, sandblasting, carvings, or non-heat working welding.
  • Steel fiber reinforced leather gloves For metal smelting or smelting work
  • General work cloth gloves Used to protect against dirt or sharp objects like knives.
  • Coated fabric gloves For applications requiring little contact with chemicals such as canning Or work in the food industry

#4 Foot protection device

Safety shoe device designed to reduce shocks prevent damage to the toes, feet, and ankles. There are many types, choose the appropriate use of the job such;

  • Metal toe shoes Can hold up to 1,100 kg of body weight and withstand the impact of objects weighing about 20 kg as well Suitable for construction workers
  • Ankle safety shoes Made from natural or synthetic rubber. Used as an insulator of electric current in electrical work.
  • Chemical protective safety shoes are made of vinyl, neoprene, natural rubber, or synthetic rubber that is resistant to chemical corrosion. There are both normal shoes and metal toe.
  • Shin-proof safety shoes Used in metal smelting and welding work. For protection against heat from smelting and preventing molten metal flashover.
  • Wooden-sole safety shoes Used in factories where floors are constantly wet, such as breweries, etc.   

All so Safety shoes must be easy to put on and easy to take off in the event of an emergency.

#5 Ear protection

Equipment for ear protection It reduces the shock from sound waves that can harm the eardrum and ear bone. Suitable for use in the automotive industry Construction industry that uses a mortar drill, etc. Safety equipment to protect your ears, there are 2 types:

Earplugs are small rubber stoppers. Used to plug into the ear canal Made from fiberglass, rubber, foam, wax, or cotton, the fiberglass earplugs will provide the best sound protection. Reduces loudness up to 20 decibels, but the downside is stiff. Can be easily irritated. Rubber parts Will reduce the loudness by 15-30 decibels and the cotton will reduce the loudness by only 8 decibels.

The earmuff is similar to the wireless headphones used to cover both ears. There is a soundproofing material in the ear cup area. Then covered with foam, plastic, or rubber to use as a sound absorber another layer. This reduces the loudness of the sound by up to 40 decibels. Some ear cups are also designed with built-in communication tools. To facilitate the coordination Without removing the ear caps, sure enough.

#6 Head protection device

Used for protection against solid objects falling onto the head Most of the helmets are made from hard plastic, metal, or fiberglass (glass fiber). Helmets are commonly used in the construction industry. Used in applications involving high voltage, altitude work, and fire fighting. If you observe, you will notice that the helmet on the market comes in many colors. Sometimes in many factories, they use the color of their hats to separate the positions of the personnel as well.

#7 Safety device to prevent falling from a height

This improves safety equipment is safe if you have to work on areas such as construction, electrical work, etc. Glass seatbelts. Standardized should be the appearance of the body harness to gather the length from your shoulders, chest, waist, and legs to help support your body. If you have to work in a high and open place No point to hold

#8 Body protection safety device

Body protection, called safety vests, is used to protect against chemical hazards, heat, lead, or sparks. Different work vests are made from different materials, such as chemical protective vests. It is made of polymers that are resistant to chemicals. Heat resistant vests are made of solid woven fabric coated with an aluminum exterior but if you want to use it to prevent ignition vests impregnated with fire retardants are required. And finally, a lead vest made of fiberglass cloth with lead surface coating. It is used to protect the body from radiation.

Wearing safety equipment while working In addition to being in compliance with factory safety laws also increases the confidence of your subordinates to perform their duties with full force. As a factory owner Therefore have to choose quality equipment suitable for the job in good condition and not damaged to prevent accidents for the wearer as effectively as possible. And for anyone looking for equipment that has a reliable standard, the Australian Workplace Safety has good safety equipment. For you to buy from head to toe with special price come and shop now.